1. [PDF] Custom Settings for Maestro Occupancy Sensor Switches ...
Press and hold On/Off and Auxiliary buttons simultaneously. 2. Release both buttons after the lens flashes for the first time. Maestro is a registered trademark ...
2. Maestro Sensors Programming and Advanced Features Explained
Programming is made simple by just press and holding the tap button and counting the number of flashes.
This article covers the Advanced Programming Features of the Maestro Sensors and why you may want to these options.
3. [PDF] Lutron Maestro Occupancy sensing switch
THIS WARRANTY DOES NOT COVER THE COST OF INSTALLATION, REMOVAL OR REINSTALLATION, OR DAMAGE RESULTING. FROM MISUSE, ABUSE, OR DAMAGE FROM IMPROPER WIRING OR ...
4. [PDF] 048480 Maestro Occupancy/Vacancy Sensor CL Dimmer ... - Lutron
Enter Programming mode to change the settings on your Maestro® Sensor Dimmer. Note: Once a feature is modified, the setting is immediately saved. (see picture ...
5. [PDF] Maestro occupancy sensing switch troubleshooting guide - Lutron
Connect green wire to ground. Ground is required for the sensor switch to function. Models: MS-OPS2. MS-VPS2. MS-OPS5M. MS-VPS5M,. MS-OPS6M2-DV.
6. [PDF] Occupancy sensing switch Installation Instructions - Lutron
Lutron Electronics Co., Inc. 7200 Suter Road. Coopersburg, PA 18036-1299. U.S.A.. For more information. Para más información.
See AlsoFind a Dealer | Arctic Cat
7. occupancy sensor time setting - Lutron Support Community
Missing: programming | Show results with:programming
Four years ago I installed a 9D10 occupancy sensor switch, and set it to turn off after one minute without sensing motion, the shortest time available. Somehow it now stays on longer. Can anyone tell me how to return to the one minute time? There seems to be a small switch on the right side, under the cover plate.
8. Maestro Occupancy/Vacancy Sensors - Dimmer Switches - Lutron
Missing: 9d10 | Show results with:9d10
Learn more about how the Lutron Maestro Sensor Dimmer Light Switches can save you money and energy!
9. [PDF] HomeWorks QS Dynamic Keypads - Lutron
Returning Dynamic Keypads to Factory Settings will remove them from the system and erase all programming. ... 9D10. MUX. MUX. COM. +24 V. 1. 2. 3. 4. HQ-J-DK420.
10. [PDF] Maestro® Occupancy Sensor C•L® Dimmer Additional Programming ...
lights off after it has been manually turned off, you should select Off While Occupied mode. Page 4. Application Note #480. 4 www.lutron.com.