The PTS® Enhanced Polymer Magazine ONE, or EPM1, is the most advanced and highest capacity spring loaded AEG magazine ever produced. Aptly named the EPM1, the magazine is the FIRST in many ways:
The EPM1 is the First collaborative development between PTS and Odin Innovations
The EPM1 is the First spring loaded AEG magazine to rival the capacity of a high cap mag with an approximate 250 bb capacity
The EPM1 is the First AEG magazine with a “Fuel Gauge” window to indicate full or remaining bb load
The EPM1 is the First magazine to reliably achieve both high load capacity and high rate of fire performance
Externally, the EPM1 has also been updated significantly. As with the original EPM and all PTS polymer products, the EPM1 shell is made with Dupont Zytel® polymer which makes it extremely durable and strong. Another carryover feature is the continuous mag well guide to reduce snagging when drawing from or inserting into pouches or the rifle mag well. Our signature EP texture has been implemented onto the shell to give the magazine a positive texture for better grip and tactile feel. The texture along the spines have been changed to ridges for even more positive tactility and allows the EPM1 to be compatible with the Magpul Maglink® Coupler.
The baseplate of the EPM1 has also been completely redesigned. The slide-in design makes the baseplate more durable and resistant to damage or popping off if the magazine is dropped. It is also significantly slimmer than the first generation EPM’s so stacking the magazines in pouches or during storage takes up less space than before. The basepad’s heel is angled to be able to act as a monopod during supported shooting and, as before, a marking matrix is incorporated into the basepad for magazine identification use. The ribbed front ledge that provides positive indexing of the magazine when drawing from a pouch or plate carrier is now incorporated into the EPM1’s main body.
The new enhanced magazine follower is the result of our design collaboration with Deranged Designs. The improved follower keeps the pressure of the spring concentrated in line with the bb stack instead adding sideways pressure to the bb stack and against the walls of the magazine bb channel. This new follower design greatly improves the bb feeding speed and consistency and completely prevents bbs from sliding past the follower and creating a jam.
The most significant and innovative external feature of the EPM1 is the Fuel Gauge window. With the new unique orange mag level indicator, you can immediately know if the magazine is filled to capacity, its approximate remaining capacity, or if the magazine is empty. When the magazine is fully loaded, mag level indicator will show at the top of the window. As you fire the bb’s out of the EPM1, the orange indicator will travel down the window until it reaches the bottom of the window at which time the magazine is emptied.
This high capacity AEG magazine holds 250rounds with the same reliability that all PTS magazines have long been famous for. It is compatible with most Airsoft AR-15 M4 AEGs including Tokyo Marui, KWA, G&P, VFC, including the HK416, PTS PDR-C, PTS ERG series, PTS Masada AEG, the AMOEBA AM Variants, and many more.
Features:
Dupont Zytel® polymer shell
250 BBs capacity
Orange mag level indicator
High efficiency compression spring
Low friction internal shell
Unique magazine mag well guide that reduce snagging
EP dot pattern texture for better grip
New polymer baseplate with angled surface and dot matrix
New design follower prevents bbs jam
Compatibility (among others):
Tokyo Marui Style AR-15 AEG Airsoft
G&P AR-15 AEG Airsoft
Krytac CRB
G&G ARP 556
PTS ERG AR-15 Airsoft
PTS Masada AEG
PTS PDR-C AEG
VFC AR-15 & HK416 AEG Airsoft
CA AR-15 & 416 AEG Airsoft
AMOEBA AM Variants AEG Airsoft
Tips:
- Use a speedloader to load your magazines. This allows you to load the optimal capacity of the magazine.
- When the magazine is still new, the spring will have to be stretched a bit. So don't overfill the magazines the first few times you play. You will notice that as you have used the magazine more often you can use the maximum capacity without putting too much stress on the spring. This is conducive to longevity.
- Make sure to completely empty the magazines after playing. This way there is no stress on the spring and your magazine will last longer.
Unfortunately, it can happen with every type/brand of magazine that it does not fit well or feed well in your replica. We recommend that you try a different brand of magazine. You can often find out on the internet whether a certain brand/type of magazine is compatible with your replica.
